Controller Configuration, Monitoring, and Control > Getting Started > Connecting to the SEL-MCP3 > Logging In To the SEL-MCP3 Control Interface

Logging In To the SEL-MCP3 Control Interface

To open a browser connection to a Selenio frame, follow these steps:

1. In your browser, enter the IP address of the SEL-MCP3 frame and click Enter to connect.

   The default IP address is 192.168.100.250.

   If the SEL-MCP3 Controller module is off or in a failed state (i.e., disconnected), then you will see a "browser cannot display the page" or "browser could not connect" message.

   Note: If you are using Windows 7 operating system, a security dialog box may appear. Click Ok to confirm that you want to go to the page. If you click No on this dialog box, you will instead see a "Page cannot be displayed" message.

   If the computer you are attempting to log in from does not have Silverlight installed, you can install the plug-in from the controller. See Installing the Silverlight Plug-in.

2. Enter a defined user name and password.

   The user name can be chosen from a drop-down menu. The default user name is Administrator, and by default there is no password (leave the field blank).

   For more information on configuring user IDs and passwords, see Managing User Accounts .

3. Click Enter.

   The SEL-MCP3 Control Interface appears.

The number of PCs connected to the SEL-MCP3 frame has an impact on the frame’s ability to present data in a timely fashion. If a large number of users are logged into the frame, response time may become slower. Up to ten separate PCs can be connected to the SEL-MCP3 frame at any one time. When you are not actively using the interface for the SEL-MCP3 frame, please log off out of the system.