Print

Device Control > Using Presets > Using Factory Recall

Previous Topic

Next Topic

Using Factory Recall

Factory recall returns all parameters on a module (either a module in one of the module slots, or the controller module) to their default settings.

Note: When a module is in Failsafe mode, you cannot reset the module to Factory Recall.

To return a module to its default parameter settings, follow these steps:

  1. In the SEL-MCP3 control application, select the Configuration tab.
  2. In the System Explorer section of the screen, select the module you want to set to defaults.
  3. Select Edit > Factory Recall.
  4. On the confirmation dialog box that appears, click OK to continue (otherwise, click Cancel to abort).

The selected module returns to its default parameter settings.

When resetting to factory defaults, you may need to wait a few seconds for changes on the module to appear.