Print

Device Control > Using Presets > Exporting a Preset

Previous Topic

Next Topic

Exporting a Preset

All presets are stored on the controller module for the SEL-MCP3 frame, which is why you can see all presets created by all users for a device, and why presets are easily shared between modules of the same type.

When you export a preset, you save it to the computer on which you are viewing the SEL-MCP3. To transfer a preset to a different SEL-MCP3 frame (without physically moving a module from frame to frame), you must first export it by following these steps:

  1. In the SEL-MCP3 control application, select the Configuration tab.
  2. Click on a preset in the bottom left quadrant of the screen.

    Presets can be exported in the Device Presets, System Presets, or All Presets lists.

  3. Select Edit > Export.

    The Export Preset dialog opens.

  4. Select a location for the preset to be stored in, and then click OK.