Print

Installation, Operation, and Specifications > Removing and Installing Components > Controller Module Removal and Installation > Controller Back Module

Previous Topic

Next Topic

Controller Back Module

To install a separate controller back module, follow these steps:

  1. Turn off power to the frame (the frame cannot be operated during this procedure).
  2. Remove the top and bottom screws of the controller back module (leave the center screw in place), and then gently pull the back module out of its slot.
  3. Insert the new SELOPT-RR or SELOPT-RO back module, and then tighten the two screws provided.
  4. Turn on the power, and close the front panel to ensure proper cooling.