Installation, Operation, and Specifications > Inspecting and Cleaning Fiber Optic Connections > Inspection and Cleaning Procedure > Dry Cleaning

Dry Cleaning

If you are using cartridge- or pocket-style dry cleaning tools, follow the manufacturer’s directions. If you are using lint-free wipes, follow these steps:

1. Fold the lint-free wipe four to eight times into a square, taking care to avoid touching the cleaning surface of the wipe.
2. Lightly wipe the fiber tip in the central portion of the lint-free wipe.

   Do not scrub the fiber. Excessive rubbing will leave scratches.

3. Repeat the wiping action on another clean section of the wipe or a new wipe.
4. Inspect the connector again with the fiberscope.
5. If the connection is clean, return to the installation steps.

   If the connector is still dirty, proceed to the wet cleaning instructions.