Print

Using the Frame Control Panel > Using the Frame — Controller Settings > Setting Control Parameters > IP Settings > Frame IP

Previous Topic

Next Topic
Frame IP

Settings on this screen determine how the frame is controlled using the Browser Control interface (the interface described in this chapter). If you make a wrong choice on this screen, you could lose connection with the frame.

IP Address

The address for the controller when you are using IPv4. When set to 0.0.0.0, IPv4 access is disabled.

The frame’s default IP address is 192.168.100.250.

Subnet Mask

The IPv4 mask address of the controller.

Gateway

The IP address to use as a gateway device to allow the controller access to other networks.

When you have completed any changes, click Apply to commit only the changes in this section to the controller module.