Using the Frame Control Panel > Using the Frame — Controller Settings > Using Parameter Control > Controller Favorites > Selecting Favorites

Selecting Favorites

Follow these steps to select or update the favorites list for the controller:

1. In the SEL-MCP3 control application, select the Configuration tab.
2. In the system explorer at the left of the screen, select the Frame - Controller module.
3. Click Parameter Control on the Frame Control Panel screen.
4. Select the All view.
5. Browse the parameters in the controller.
   • To designate a parameter as a favorite, click the white favorite indicator in the top right corner of the parameter control.
   • To remove the favorite designation from a parameter, click the yellow favorite indicator in the top right corner of the parameter control.

   You can select Favorites view to view the selected favorite parameters.

   Favorites you have designated are saved in local memory until you save them. The marked favorites are saved locally, even if you switch to another device in the same frame. However, users on other PCs will not be able to see the updated favorites list, and if you browse away from the frame without saving favorites, your changes will be lost.

   Note: Favorites will not show up in the Favorites View until they have been saved.

6. When you are satisfied with the favorites designated for a module, click Save Favorites.

Saved favorite parameters are stored on the controller module, and can be used by any operator on the system.

Keep in mind that if administrators on different PCs are adjusting the favorites list, their changes will overwrite each other’s. You will not see updated favorites from another PC until you refresh.